Official Luthiers Forum!
http://www-.luthiersforum.com/forum/

ES 335 - Soliloquy
http://www-.luthiersforum.com/forum/viewtopic.php?f=10130&t=34302
Page 1 of 1

Author:  Robb Hindle [ Sun Nov 20, 2011 10:31 am ]
Post subject:  ES 335 - Soliloquy

Here's the 1st of many regarding my build of an ES335 clone. Plans purchased from eBay. Since this is only my second build, I'll still be using a purchased neck, but this one is a LP variety, and needed some mods to be used on a 335. Mods include

a bit of slicing & dicing on the tenon area

Author:  Robb Hindle [ Sun Nov 20, 2011 9:23 pm ]
Post subject:  Re: ES 335 - Soliloquy

Here's a couple more shots of the neck. It's starting to look good!

Author:  Robb Hindle [ Sun Nov 27, 2011 6:51 pm ]
Post subject:  Re: ES 335 - Soliloquy

Here's the neck essentially done. Some finish contouring at the tenon still to do, but aside from that....shown in white primer.

Author:  Robb Hindle [ Mon Dec 12, 2011 11:23 am ]
Post subject:  Re: ES 335 - Soliloquy

Some new pics...Patterns laid out and 1st cuts....

More to come...

Thanks!

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/